PhotoLite User’s Manual
PhotoLite Version 2.0
Ananke Media Systems
Revision 108, September 2010
Introduction
PhotoLite is a versatile photographic toolkit, especially designed for on-location shooting in Second Life. PhotoLite gives you precise control over lighting, effects, and gazers. With the option of menu, HUD and/or chat commands, the PhotoLite control system allows you to focus on what matters, anywhere: your subject.
Please see the Usage Agreement section at the end of this manual for some usage limitations.
Quick Operation Guide
These instructions provide a quick introduction to the basic operation of PhotoLite’s most used features:
Menus – Quick Guide
- left-click the green control box for menus
- to move forward to the next menu, use buttons with the >> symbol
- to return to previous menus, use buttons with the << symbol
- Lights >> Light [1-6] >> Create – to rez lights
- Lights >> Light [1-6] >> Position – to position lights
- Lights >> Light [1-6] >> Position >> Model – to choose preselected positions
- Lights >> Light [1-6] >> Colours – to change light colour
- Effects >> Gen [1-6] >> Create – to rez effects generators
- Effects >> Gen [1-6] >> Glow/Snow/Fog/Smoke – to select effect
- Effects >> Gen [1-6] >> Position – to position effects generators
- Effects >> Gen [1-6] >> Colours – to change effects colour
- Gazers >> Gazer [1-6] >> Create – to rez gazers
- Gazers >> Gazer [1-6] >> Position – to position gazers
HUD – Quick Guide
- locate PhotoLite HUD in your inventory
- right-click and select wear
- see diagram below for guide to operation (click image for larger view)
PhotoLite HUD Quick Start Guide (pdf)
Lights, Effects, and Gazers Panels:
- use number buttons to select desired element
- use Create button to rez element
- use Position button to activate Position Panel
- use Position Panel to move selected element
- use Colour button to activate Colour Panel
- use Colour Panel to change colour
Position Panel:
- use figure icons to choose preselected positions
- use XYZ buttons to position element manually using XYZ axes
- use distance buttons to set amount element will move
Colour Panel:
- use colour buttons to select colour depicted
- use RGB buttons to customize colours
- use RGB values to set amount RGB levels will change
Continue reading for detailed instructions on all the many features and operations PhotoLite provides.
Setting Up Your PhotoLite
You probably received your PhotoLite packaged in a box. If this is so, please unpackage it into a folder in your inventory. Inside this folder you will find the following items:
-
PhotoLite Control Box. This is the command centre that you must touch in order to operate the PhotoLite using menus.
-
PhotoLite HUD. You can use this HUD to operate the PhotoLite instead of the menus.
-
PhotoLite User’s Manual. This is the complete user’s manual.
-
Read Me. This notecard can contain last-minute information and release notes. It is important that you read it before you set up your PhotoLite.
To set up your PhotoLite, just rez the PhotoLite Control Box wherever you want to use it. Since PhotoLite is designed to be used on location, you will usually keep it in your inventory and only rez it when needed.
Important: The PhotoLite Control Box is copiable, so you can rez multiple copies if you wish. Please see the Setting Up Multiple Instances of PhotoLite section for more information about using multiple PhotoLites side by side.
Once you have set up your PhotoLite, you can customise it through a number of settings. Settings are described at the end of this manual in the Settings section.
Setting Up the HUD
You can operate your PhotoLite using menus or the enclosed HUD. You can also combine both, using one or the other depending on the moment and your preferences. Follow these steps to start using the HUD:
-
Locate the PhotoLite HUD in your inventory. This should be in the same folder together with the Control Box.
-
Right-click the HUD and select Wear. The HUD will attach to the Center HUD slot by default. If you want to change this, right-click the HUD in your inventory and select Attach to HUD (rather than Wear) and then select the desired HUD slot.
-
Adjust the position of the HUD on screen. By default, the HUD appears towards the left-hand side of the screen, but you can change this. Right-click any solid area of the HUD (such as the title area with the “PhotoLite” logo) and select Edit. Use the green and blue arrows to move the HUD to your preferred spot on screen. If you can’t see the HUD, rotate the mouse wheel towards you while editing it to display out-of-screen objects.
If you want to detach the HUD from your screen at a later time, right-click on a solid area of the HUD and select Detach.
Please bear in mind that you need to be within 50 metres of the Control Box in order to use the HUD. If you walk away, your PhotoLite will not respond.
Important: Anybody with the appropriate access permissions (see “UsersAllowed” in the Settings section) can get a HUD delivered to them by clicking the Control Box and selecting Options, Get HUD.
Setting Up Multiple Instances of PhotoLite
It is possible to set up multiple instances of the PhotoLite next to each other. In order to do this, and to avoid interference between them, you must set them to use different channels. To set up multiple instances, rez the first Control Box and set it to use any given channel. Please see the Settings section at the end of this manual for detailed information about how to set the channel. Then rez another Control Box and set it to a new channel. You can go on rezzing up to nine different instances of PhotoLite and setting them to different channels.
The PhotoLite HUD also carries a channel setting. If you change the channel in your Control Box, please change the channel in the HUD as well. The mechanism is the same.
Basic Operation
The PhotoLite is very easy to use. Touch (left-click) the green Control Box and the Main menu will appear. We suggest you leave this window open while you work with the PhotoLite. You can touch the Control Box at any time if you happen to dismiss the menu window.
Once you have rezzed a light, effect generator or gazer, you can also use the *Easy Touch* feature to quickly access the dialog menu for a specific element. Just touch (left-click) the desired light, effect generator or gazer, and its corresponding menu will appear. Please see the *Easy Touch* section below for more details.
Alternatively, you can use the PhotoLite HUD or the chat interface to operate PhotoLite. Please see the section on Setting Up the HUD above to learn how to attach the HUD, and the Using the HUD section below for an explanation of the HUD user interface. Please see the Chat Interface section below for a detailed instructions on using the chat commands.
Please note that buttons showing just a hyphen (”-”) are sometimes used as spacers for a better layout. You can safely ignore these buttons.
The main menu contains the following buttons, most of which provide navigation to other menus:
-
Hide Box / Show Box >> – Click this button to make the Control Box visible or invisible. This button automatically toggles between Hide Box or Show Box.
-
Lights >> – Click this button to access the lights menu. Here you will be able to create and customise lights for your PhotoLite.
-
Effects >> – Click this button to access the effects menu. Here you will be able to play with effects such as fog or snow.
-
Gazers >> – Click this button to access the gazers menu. Here you will be able to manage gazers for your models.
-
Configs >> – Click this button to access the configurations menu. Here you will be able to dump the current configuration or load a new one.
-
Options >> – Click this button to access the options menu.
The following sections describe these areas in depth.
Hide Box / Show Box
- Click this button to make the Control Box visible or invisible. The button automatically toggles between Hide Box or Show Box. This feature allows you to position the Control Box conveniently for ease of access while setting up your shots. You can then make it invisible when it’s time to start shooting.
Options
The options menu contains the following buttons:
-
Manual – Click this button to open the web version of the PhotoLite User’s Manual. You many find the layout and graphics of the web version easier to use than the notecard version.
-
Info – Click this button to display information about the PhotoLite product and current settings. The information will appear on your chat channel.
-
Reset – Click this button to reset the PhotoLite to its default stage. All the settings will be reset to default. All lights, effect generators and gaze points will be deleted.
-
Update – Click this button to check for updates to PhotoLite. If an update is available, it will be delivered to you within a few minutes.
-
Get HUD – Click this button to have a PhotoLite HUD delivered to you.
-
<< Main – Click this button to return to the main menu window.
Lights
You can create up to six lights with your PhotoLite. Each light is fully customisable in colour, intensity and other parameters, and you can move them around as you wish. The lights menu contains the following buttons:
-
light buttons (1 to 6) – Click these buttons to access a menu for editing that particular light. See next sections for an explanation.
-
Show All – Show all the existing lights. Details are explained below.
-
Hide All – Hide all the existing lights. Details are explained below.
-
On All – Switch on all the existing lights. Details are explained below.
-
Off All – Switch off all the existing lights. Details are explained below.
-
Delete All – Deletes all the existing lights. Details are explained below.
-
<< Main – Click this button to return to the main menu window.
Initially, no lights exist with the PhotoLite. The first thing you need to do to work with a light is create it. Once it is created, you can change its position, colour and other parameters. The light menu window always shows which light it is referring to (light 1 to light 6) at the top.
You can access a light’s menu directly by using the *Easy Touch* feature: simply touch (left-click) the light and its corresponding menu will appear. The light menu contains the following buttons:
-
Create/Delete – When the light being edited does not exist yet, this button appears as “Create”. Click it to create the light. A light globe with default properties will appear, and the button will be changed to “Delete”. You can click this button at any time to delete the light.
-
Show/Hide – Shows or hides an existing light. This button changes to “Hide” or “Show” depending on the visibility status of the light being edited. When you hide a light, it keeps emitting but you cannot see the globe or name.
-
On/Off – Switches on or off an existing light. This button changes to “Off” or “On” depending on the status of the light being edited. When you switch off a light, it stays visible but it does not emit light.
-
Position >> – Click this button to access the light position menu. See next sections for an explanation.
-
Colours >> – Click this button to access the light colours menu. See next sections for an explanation.
-
Params >> – Click this button to access the light parameters menu. See next sections for an explanation.
- << Lights – Click this button to return to the lights menu window.
If you attempt to operate on a light that has not been created (for example, change its position or colour), the light is automatically created for you.
Light Position
You can move a light to any point around the PhotoLite. The PhotoLite uses X, Y and Z coordinates to position lights, using the regular region coordinates of Second Life.
You can increase or decrease the amount the light moves in 1, 0.25 or 0.05 metre steps. The light position menu contains the following buttons:
-
amount buttons (1 m, 0.25 m, 0.05 m) – Click one of these buttons first to set the amount the selected light will move along any axis (keep reading).
-
X – and X + – Decrease or increase the X coordinate of the light by the selected amount.
-
Y – and Y + – Decrease or increase the Y coordinate of the light by the selected amount.
-
Z – and Z + – Decrease or increase the Z coordinate of the light by the selected amount.
-
Centre – Move the light to the default centre position.
-
Model >> – Click this button to access the Model menu. See below for an explanation.
-
<< Light – Click this button to return to the light menu window.
You can click a light at any time to display XYZ coordinate axes pointing in the X +, Y + and Z + directions. This can be a helpful guide when positioning the lights. To display the XYZ axes, simply touch (left-click) the light and hold for 1.5 seconds, then release. The XYZ axes will appear. To toggle the XYZ axes off, touch the light and hold for 1.5 seconds, then release. The XYZ axes will disappear.
Model Menu
The Model menu provides a number of preset light positions. When you click one of the light position buttons on this menu, the light seeks the nearest avatar and positions itself accordingly. If multiple avatars are detected, the light will take the nearest one as reference. The Model menu contains the following buttons:
-
Left and Right – Move the light to the left or right of the model, and slightly in front of him/her.
-
Front and Back – Move the light right in front or behind the model.
-
Front Up and Back Up – Move the light in front or behind of the model, and above his/her head.
-
Above – Move the light right above the model.
-
Feet – Move the light in front of the model’s feet.
-
Closer and Further – Move the light closer or further away from the model by the selected amount (see Light Position section).
-
<< Position – Click this button to return to the light position menu.
Light Colours
You can make a light any colour you want. A few basic colours are pre-defined and can be applied by clicking a button; other colours can be obtained by using the custom colour feature. The light colours menu contains the following buttons:
-
colour buttons (Red, Green, Blue, Cyan, Magenta, Yellow, Warming, Cooling, White, Soft) – Apply the colour to the light.
-
Custom >> – Click this button to access the light custom colour menu. See below for an explanation.
-
<< Light – Click this button to return to the light menu window.
Custom Colours
A custom colour can be obtained by mixing the necessary amounts of red, green and blue components. You can increment or decrement each component in 20%, 5% or 1% steps. The light custom colour menu contains the following buttons:
-
percentage buttons (20 %, 5 %, 1 %) – Switch to this amount to increase or decrease colour components (keep reading).
-
Red – and Red + – Decrease or increase the red component of the current colour by the selected percentage.
-
Green – and Green + – Decrease or increase the green component of the current colour by the selected percentage.
-
Blue – and Blue + – Decrease or increase the blue component of the current colour by the selected percentage.
-
<< Colours – Click this button to return to the light colours menu window.
As you click the increase or decrease component buttons, the light will show the current colour values being applied on your chat channel.
Light Parameters
In addition to position and colour, you can change a light’s intensity (its strength), radius (how far it reaches) and falloff (how much it fades with distance). The light parameters menu contains the following buttons:
-
Intensity – and Intensity + – Decrease or increase the intensity of the light.
-
Radius – and Radius + – Decrease or increase the radius of the light.
-
Falloff – and Falloff + – Decrease or increase the falloff of the light.
-
<< Light – Click this button to return to the light menu window.
Effects
You can use various visual effects with your PhotoLite, which can add a nice touch to some photos. Effects are generated by effect generators. You can have up to six effect generators at any time. The effects menu contains the following buttons:
-
generator buttons (1 to 6) – Click these buttons to access a menu for editing that particular effect generator. See next sections for an explanation.
-
Show All – Show all the existing effect generators. Details are explained below.
-
Hide All – Hide all the existing effect generators. Details are explained below.
-
On All – Switch on all the existing effect generators. Details are explained below.
-
Off All – Switch off all the existing effect generators. Details are explained below.
-
Delete All – Deletes all the existing effect generators. Details are explained below.
-
<< Main – Click this button to return to the main menu window.
Initially, no effect generators exist with the PhotoLite. The first thing you need to do to work with one is create it. Once it is created, you can change its position, effect type and other properties, which may depend on the selected effect type. The effect generator menu window always shows which effect generator it is referring to (generator 1 to generator 6) at the top.
You can access an effect generator’s menu directly by using the *Easy Touch* feature: simply touch (left-click) the effect generator and the corresponding menu will appear. The menu contains the following buttons:
-
Create/Delete – When the effect generator being edited does not exist yet, this button appears as “Create”. Click it to create the generator. An inactive generator will appear, and the button will be changed to “Delete”. You can click this button at any time to delete the generator.
-
Show/Hide – Shows or hides an existing generator. This button changes to “Hide” or “Show” depending on the visibility status of the generator being edited. When you hide a generator, it keeps working but you cannot see it.
-
On/Off – Switches on or off an existing effect generator. This button changes to “Off” or “On” depending on the status of the generator being edited. When you switch off a generator, it stays visible but it does not produce any effect.
-
Position >> – Click this button to access the generator position menu. See next sections for an explanation.
-
Glow – Click this button to make the generator produce glowing spheres.
-
Fog – Click this button to make the generator produce fog.
-
Smoke – Click this button to make the generator produce smoke.
-
Snow – Click this button to make the generator produce snow.
-
Props >> – Click this button to access the generator properties menu. See next sections for an explanation.
-
<< Effects – Click this button to return to the effect generators menu window.
If you attempt to operate on an effects generator that has not been created (for example, change its position or properties), the effects generator is automatically created for you.
Effect Generator Position
You can move an effect generator to any point around the PhotoLite. The PhotoLite uses X, Y and Z coordinates to position generators, using the regular region coordinates of Second Life. This is the same system as used with lights.
You can increase or decrease the amount the generator moves in 1, 0.25 or 0.05 metre steps. The generator position menu contains the following buttons:
-
amount buttons (1 m, 0.25 m, 0.05 m) – Click one of these buttons first to set the amount the selected generator will move along any axis (keep reading).
-
X – and X + – Decrease or increase the X coordinate of the generator by the selected amount.
-
Y – and Y + – Decrease or increase the Y coordinate of the generator by the selected amount.
-
Z – and Z + – Decrease or increase the Z coordinate of the generator by the selected amount.
-
Centre – Move the generator to the default centre position.
-
Model >> – Click this button to access the seek model position menu. This menu works like that of lights.
-
<< Generator – Click this button to return to the generator menu window.
You can click a generator at any time to display XYZ coordinate axes pointing in the X +, Y + and Z + directions. This can be a helpful guide when positioning the generator. To display the XYZ axes, simply touch (left-click) the generator and hold for 1.5 seconds, then release. The XYZ axes will appear. To toggle the XYZ axes off, touch the generator and hold for 1.5 seconds, then release. The XYZ axes will disappear.
Effect Generator Properties
Depending on the type of effect assigned to a generator, you can change some properties that control how the effect is produced. The effect generator properties menu may contain combinations of the following buttons:
-
Density – and Density + – Decrease or increase the density of the effect.
-
Colours >> – Click this button to access the effect colours menu. This menu works like that of light colours, including the use of custom colours.
-
<< Generator – Click this button to return to the generator menu window.
Gazers
A gazer allows you to fix your model’s eyes on a specific target, so that you can control the direction of her or his gaze. Ask the model to Alt+Click on a gazer, and when you move the gazer, the model’s eyes will track with it. You can have up to six gazers at any time. The gazers menu contains the following buttons:
-
Gazer (1 to 6) – Click these buttons to access a menu for editing that particular gazer. See next sections for an explanation.
-
Show All – Show all the existing gazers. Details are explained below.
-
Hide All – Hide all the existing gazers. Details are explained below.
-
Delete All – Deletes all the existing gazers. Details are explained below.
-
<< Main – Click this button to return to the main menu window.
Initially, no gazers exist with the PhotoLite. The first thing you need to do to work with one is create it. Once it is created, you can change its position. The gazers menu window always shows which gazer it is referring to (gazer 1 to gazer 6) at the top.
You can access a gazer’s menu directly by using the *Easy Touch* feature: simply touch (left-click) the gazer and its corresponding menu will appear. The menu contains the following buttons:
-
Create/Delete – When the gazer being edited does not exist yet, this button appears as “Create”. Click it to create the gazer. A gazer will appear, and the button will be changed to “Delete”. You can click this button at any time to delete the gazer.
-
Show/Hide – Shows or hides an existing gazer. This button changes to “Hide” or “Show” depending on the visibility status of the gazer being edited. When you hide a gazer, it keeps working but you cannot see it.
-
Position >> – Click this button to access the gazer position menu. See next sections for an explanation.
-
<< Gazers – Click this button to return to the Gazers menu window.
If you attempt to operate on a gazer that has not been created (for example, change its position), the gazer is automatically created for you.
Gazer Position
You can move a gazer to any location around the PhotoLite. The PhotoLite uses X, Y and Z coordinates to position gazers, using the regular region coordinates of Second Life. This is the same system as used with lights and effects generators.
You can increase or decrease the amount the gazer moves in 1, 0.25 or 0.05 metre steps. The gazer position menu contains the following buttons:
-
amount buttons (1 m, 0.25 m, 0.05 m) – Click one of these buttons first to set the amount the selected gazer will move along any axis (keep reading).
-
X – and X + – Decrease or increase the X coordinate of the gazer by the selected amount.
-
Y – and Y + – Decrease or increase the Y coordinate of the gazer by the selected amount.
-
Z – and Z + – Decrease or increase the Z coordinate of the gazer by the selected amount.
-
Centre – Move the gazer to the default centre position.
-
Model >> – Click this button to access the seek model position menu. This menu works like those of lights or effects generators.
-
<< Gazers – Click this button to return to the Gazers menu window.
You can click a gazer at any time to display XYZ coordinate axes pointing in the X +, Y + and Z + directions. This can be a helpful guide when positioning the gazer. To display the XYZ axes, simply touch (left-click) the gazer and hold for 1.5 seconds, then release. The XYZ axes will appear. To toggle the XYZ axes off, touch the gazer and hold for 1.5 seconds, then release. The XYZ axes will disappear.
*Easy Touch*
The *Easy Touch* feature provides a quick way to access the dialog menus for the lights, effects and gazers in PhotoLite. Once any of these elements has been created, you can simply touch (left-click) an element to open the menu for that item. Navigating menus via the Control Box can become tedious, so *Easy Touch* greatly facilitates the ease and flexibility of operating your PhotoLite.
To use the *Easy Touch* feature, simply touch (left-click) any rezzed light, effects generator or gazer. The dialog menu for the touched element will instantly appear.
You can open multiple dialog menus if you wish. Each new dialog menu will appear over top of any pre-existing menus. For this reason, it’s best to close each dialog menu once you’ve finished making adjustments (click the “Ignore” button to close a menu). Otherwise, a large number of menus may start to accumulate on your viewer.
Once you’ve opened a dialog menu, you can use it to navigate to all the other menus for PhotoLite operations as well. Of course, the Control Box is still the best point for accessing the Main Menu.
XYZ coordinate axes on the lights, effect generators and gazers are also available when you click one of these elements. The XYZ axes can be a helpful guide when positioning an element. To display the XYZ axes, simply touch (left-click) the light, effect generator or gazer and hold for 1.5 seconds, then release. The XYZ axes will appear when you release the mouse button. To toggle the XYZ axes off, touch and hold on the light, generator or gazer for 1.5 seconds, then release. The XYZ axes will disappear.
You can set permission for who can access the dialog menus of your PhotoLite via the Control Box. By setting the UsersAllowed notecard in the Control Box to Owner, Group, or All, the *Easy Touch* feature on the lights, effect generators, and gazer will only respond for the users you’ve allowed. Please see the Settings section below for instructions on setting UsersAllowed for PhotoLite.
Configurations
Configurations allow you to save all the properties of lights, effects and gazers of the PhotoLite under a name of your choice. You can retrieve a saved configuration at any time and the PhotoLite will adjust accordingly. The configurations menu contains the following buttons:
-
configuration buttons – Up to nine buttons can appear showing the names of the configurations that have been saved. Click one of these buttons to apply that configuration.
-
Dump – Dump the current configuration to the chat channel. You can use the resulting text to save a new configuration. How to do this is explained below.
-
Reset – Reset the PhotoLite to its default appearance, deleting all lights, effect generators and gazers.
-
<< Main – Click this button to return to the main menu window.
Please note that the PhotoLite does not reset before applying a new configuration. The configuration is applied on top of any existing light, effect and gazer adjustments. Use the Reset button before applying a configuration if you want a fresh start.
Important: You may see the message “Configurations are still being read.” in the configurations menu, especially just after you modify the configurations notecard (see next sections). This means that the PhotoLite is still reading the new configurations and cannot display the appropriate buttons at this time. If this is the case, please go back to the main menu, wait a few seconds, and move to the configurations menu again.
Saving a New Configuration
The text that the PhotoLite dumps into the chat channel when you click the Dump button can be used to save the current configuration under a name of your choice. Follow these steps to accomplish this:
-
Click Dump to obtain a text description of the current configuration of the PhotoLite.
-
Find the generated text in the Near Me (Chat History) window. The first line shoud read “Begin Dump”, and the last line should read “End Dump”. If the dump is too large, one or more lines marked “(dump continues)” may appear interspersed.
-
Copy the text between the begin and end lines, not including them, by selecting it and using the menus Edit, Copy.
-
Edit the PhotoLite Control Box by right-clicking it and selecting Edit in the pie menu. An Edit window appears.
-
Click the Content tab. Find a notecard named “.Configurations”. You will see also other items here in addition to settings; don’t try to change, delete or rename these items.
-
Double click the configurations notecard to open it.
-
Move to the end of the notecard. In a new line, type the word “Configuration:” (notice the colon without any blanks before it) followed by the name that you want to give to the new configuration. Press Enter.
-
Paste the copied text by using the menus Edit, Paste.
-
Delete all the “(dump continues)” lines that may exist.
-
Close the notecard. When asked to save changes, click Save.
-
Wait a few seconds for the PhotoLite to reload the configurations. Your new configuration will show up in the configurations menu.
Important: Please remember to not include the begin and end dump lines in your copied text, and to delete the “(dump continues)” lines that may appear.
Deleting a Saved Configuration
In addition to adding configurations, you can also delete existing ones. Follow these steps to accomplish this:
-
Edit the PhotoLite Control Box by right-clicking it and selecting Edit in the pie menu. An Edit window appears.
-
Click the Content tab. Find a notecard named “.Configurations”. You will see also other items here in addition to settings; don’t try to change, delete or rename these items.
-
Double click the configurations notecard to open it.
-
Find the configuration that you want to delete. It will be marked by the word “Configuration:” (notice the colon without any blanks before it) followed by the configuration name.
-
Delete all the text between this line and the next configuration name line, or until the end of the notecard if this is the last configuration.
-
Close the notecard. When asked to save changes, click Save.
-
Wait a few seconds for the PhotoLite to reload the configurations. The deleted configuration will have disappeared from the configurations menu.
Using the HUD
The PhotoLite HUD provides an alternative way to control the lights, effects and gazers. You will still have to use the menus to work with configurations and options, but the HUD will hopefully be useful for the most common tasks with PhotoLite.
The HUD takes quite a significant amount of screen real estate. When you are not using it, you can hide it by clicking the top panel where the PhotoLite logo is. Click the top panel again to display the HUD.
The HUD is organised vertically in different areas. These areas correspond roughly to the PhotoLite menus: Lights, Effects Generators and Gazers. At the bottom of the HUD there are two additional panels: a Position Panel and a Colour Panel. These two panels at the bottom work together with the lights, effects generators and gazers panels as explained in the following sections.
Hide Box / Show Box
On the top panel, immediately below the PhotoLite logo, there are two square buttons: one green and one grey. These buttons correspond to the Hide Box / Show Box buttons on the main menu.
Use the grey button to make the Control Box invisible, and the green button to make it visible. This feature allows you to position the Control Box conveniently for ease of access while setting up your shots. You can then make it invisible when it’s time to start shooting.
Lights
Use the number buttons (1 to 6) to select a light, or the All button to operate on all lights at the same time. Please bear in mind that some operations cannot be done on all lights at the same time, and you will have to target them one by one.
Once you have selected a light, clik the create (a white circle) and delete (a grey circle covered by a red “x”) buttons to create or delete it. Use the show (a white circle with a black dot inside) and hide (a grey circle with a grey dot inside) buttons to make the light visible or invisible. Use the on (a bright green circle) and off (a dark grey circle) buttons to switch the light on or off.
To change the light colour, click the Colour button and then use the Colour Picker panel at the bottom to select a predefined colour or compose a custom one. You can also use the Warm, Cool and Soft buttons to adjust the light colour.
To change the light position, click the Position button and then use the Position Editor at the bottom to move it. The Position Editor is explained below.
You can use the I, R and F buttons to adjust the light’s intensity, radius and falloff parameters, respectively. Click the minus and plus icons to decrease or increase these values.
Effects
Use the number buttons (1 to 6) to select an effects generator, or the All button to operate on all effects generators at the same time. Please bear in mind that some operations cannot be done on all effects generators at the same time, and you will have to target them one by one.
Once you have selected an effects generator, clik the create (a white circle) and delete (a grey circle covered by a red “x”) buttons to create or delete it. Use the show (a white circle with a black dot inside) and hide (a grey circle with a grey dot inside) buttons to make the effects generator visible or invisible. Use the on (a bright green circle) and off (a dark grey circle) buttons to switch the effects generator on or off.
Use the Smoke, Fog, Glow and Snow buttons to set the effect type.
To change the effect colour, click the Colour button and then use the Colour Picker panel at the bottom to select a predefined colour or compose a custom one. Please bear in mind that not all effect types support colour changing; for example, snow is always white.
To change the effects generator position, click the Position button and then use the Position Editor at the bottom to move it.
You can use the D buttons to adjust the effect density. Click the minus and plus icons to decrease or increase this value.
Gazers
Use the number buttons (1 to 6) to select a gazer, or the All button to operate on all gazers at the same time. Please bear in mind that some operations cannot be done on all gazers at the same time, and you will have to target them one by one.
Once you have selected a gazer, click the create (a white circle) and delete (a grey circle covered by a red “x”) buttons to create or delete it. Use the show (a white circle with a black dot inside) and hide (a grey circle with a grey dot inside) buttons to make the gaze point visible or invisible.
To change the gazer position, click the Position button and then use the Position Panel at the bottom to move it.
Position Panel
The Position Panel works on the currently selected light, effects generator or gazer, as shown on the panel’s title bar. For example, if you click the button 1 in the Lights panel, you will see that the text “Light 1” appears on the Position Panel’s title bar. If no element (light, effects generator or gazer) is selected, the Position Panel remains idle.
Once you have selected an element to move, use the intelligent position buttons to move it around the model. These buttons show a grey human torso plus a yellow circle, indicating how the element is positioned if you click the button. The available options are, from left to right and top to bottom, Right, Left, Back, Front, Back Up, Front Up, Above, Feet, Centre, Closer and Further.
You can also use the X, Y and Z buttons to manually adjust the element position. Click the minus and plus icons to decrease or increase the element’s X, Y or Z coordinates. The distance amount that the element is moved each time you click one of these buttons is set by the 1.00, 0.25 and 0.05 buttons, which correspond to 1 metre, 25 cm and 5 cm, respectively.
Colour Panel
The Colour Panel works on the currently selected light or effects generator, as shown on the panel’s title bar. For example, if you click the button 1 in the Lights panel, you will see that the text “Light 1” appears on the Colour Panel’s title bar. If no element (light or effects generator) is selected, the Colour Panel remains idle.
Once you have selected an element, use the predefined colour buttons to set its colour. The available options are, from left to right and top to bottom, Red, Green, Blue, Cyan, Magenta, Yellow, Grey, White, Dark Red, Dark Green, Dark Blue, Dark Cyan, Dark Magenta, Dark Yellow, Dark Grey and Black.
You can also use the R, G and B buttons to manually adjust the colour’s red, green and blue components. Click the minus and plus icons to decrease or increase the colour’s amounts of red, green and blue. The amount that a colour component is changed each time you click one of these buttons is set by the 20%, 5% and 1% buttons, which correspond to 0.2, 0.05 and 0.01 colour units, respectively.
Chat Interface
The chat interface works by letting you type commands on the chat area that the PhotoLite can understand. By default, the PhotoLite uses chat channel number 81; you can change this if you wish using a setting. Please see the Settings section at the end of this manual to learn how to do that.
To give a command to the PhotoLite using the chat interface, type /81 (or the number of the chat channel if you have changed it) followed by the command. For example:
/81 info
That will make the PhotoLite to display some information, and is equivalent to clicking the Info button on the menus. Some commands are composed of two words separated by a dot, and may take arguments. Arguments follow the command separated by spaces. For example:
/81 config.load Demo
That will make the PhotoLite load the “Demo” configuration.
The chat commands supported by PhotoLite are described in the following sections.
General Commands
These commands are related to the buttons in the options menu.
-
reset – Like clicking the Reset button.
-
info – Like clicking the Info button.
Hide Box / Show Box Commands
These commands are related to the Hide Box / Show Box buttons on the main menu.
- hidebox – makes the control box invisible.
- showbox – makes the control box visible.
Lights Commands
These commands are related to the buttons in the various lights menus. Commands referring to a particular light carry a light id number (between 1 and 6) after the word “light” and prefixed by a “#” character; this is indicated by “#n” in the commands list below. Please do not leave any blanks between the word “light” and the “#” sign or between the “#” sign and the light id number.
-
lights.deleteall – Like clicking the Delete All button in the lights menu.
-
lights.showall – Like clicking the Show All button in the lights menu.
-
lights.hideall – Like clicking the Hide All button in the lights menu.
-
lights.onall – Like clicking the On All button in the lights menu.
-
lights.offall – Like clicking the Off All button in the lights menu.
-
light#n.create – Like clicking the Create button in the light menu. For example, “light#2.create” creates light number 2.
-
light#n.delete – Like clicking the Delete button in the light menu.
-
light#n.show – Like clicking the Show button in the light menu.
-
light#n.hide – Like clicking the Hide button in the light menu.
-
light#n.on – Like clicking the On button in the light menu.
-
light#n.off – Like clicking the Off button in the light menu.
-
light#n.colour – Like using the buttons in the light colours menu. Please specify a colour vector as an argument. For example: “light#2.colour <1.0, 0.5, 0.2>” sets the colour of light number 2 to <1.0, 0.5, 0.2>.
-
light#n.coloured – Like using the buttons in the light custom colour menu. Please specify one or more colour edits as arguments. Each colour edit is composed of a letter (“r”, “g” or “b”), a plus or minus sign (indicating whether to increment or decrement that colour component) and a colour amount. For example: “light#2.coloured r-0.1 b+0.5” decreases the amount of red by 0.1 and increases the amount of blue by 0.5. Do not leave blanks between a letter and a sign or between a sign and the colour amount.
-
light#n.warm – Like clicking the Warming button in the light colours menu.
-
light#n.cool – Like clicking the Cooling button in the light colours menu.
-
light#n.soft – Like clicking the Soft button in the light colours menu.
-
light#n.intensity – Sets the light’s intensity. Please specify the desired intensity (between 0.0 and 1.0) as an argument. For example, “light#2.intensity 0.9” sets the intensity of light number 2 to 0.9.
-
light#n.radius – Sets the light’s radius. Please specify the desired radius (between 0.0 and 20.0) as an argument. For example, “light#2.radius 12.5” sets the radius of light number 2 to 12.5.
-
light#n.falloff – Sets the light’s falloff. Please specify the desired falloff (between 0.0 and 2.0) as an argument. For example, “light#2.falloff 1.5” sets the falloff of light number 2 to 1.5.
-
light#n.paramsed – Like using the intensity, radius and falloff buttons in the light parameters menu. Please specify one or more parameter edits as arguments. Each parameter edit is composed of a letter (“i”, “r” or “f”, for intensity, radius and falloff, respectively), a plus or minus sign (indicating whether to increment or decrement that parameter) and an amount. For example: “light#2.paramsed i+0.5 r-2” increases the intensity of light number 2 by 0.5 and decreases its radius by 2. Do not leave blanks between a letter and a sign or between a sign and the amount.
-
light#n.pos – Sets the light’s position in relation to the stage centre. Please specify a position vector as an argument. For example: “light#2.pos <1.0, -2.5, 0.0>” moves light number 2 one metre to the right and 2.5 metres down from the stage centre.
-
light#n.poscentre – Like clicking the Centre button in the light position menu.
-
light#n.posed – Like using the buttons in the light position menu. Please specify one or more position edits as arguments. Each position edit is composed of a letter (“x”, “y” or “z”), a plus or minus sign (indicating whether to increment or decrement that position component) and a distance. For example: “light#2.posed x-1 z+0.5” moves light number 2 one metre to the right and 0.5 metres up from its current position. Do not leave blanks between a letter and a sign or between a sign and the distance number.
-
light#n.seek – Like using the buttons in the light seek model menu. Please specify a seek position name as an argument, using lower case. For example: “light#2.seek feet” moves light number 2 close to the model’s feet.
-
light#n.closer – Like clicking the Closer button in the light seek model menu.
-
light#n.further – Like clicking the Further button in the light seek model menu.
Effects Generators Commands
These commands are related to the buttons in the various effects generators menus. Commands referring to a particular effects generator carry an effects generator id number (between 1 and 6) after the word “effgen” and prefixed by a “#” character; this is indicated by “#n” in the commands list below. Please do not leave any blanks between the word “effgen” and the “#” sign or between the “#” sign and the effects generator id number.
-
effgens.deleteall – Like clicking the Delete All button in the effects menu.
- effgens.showall – Like clicking the Show All button in the effects menu.
- effgens.hideall – Like clicking the Hide All button in the effects menu.
- effgens.onall – Like clicking the On All button in the effects menu.
- effgens.offall – Like clicking the Off All button in the effects menu.
- effgen#n.create – Like clicking the Create button in the effects generator menu. For example, “effgen#2.create” creates effects generator number 2.
- effgen#n.delete – Like clicking the Delete button in the effects generator menu.
- effgen#n.show – Like clicking the Show button in the effects generator menu.
- effgen#n.hide – Like clicking the Hide button in the effects generator menu.
- effgen#n.on – Like clicking the On button in the effects generator menu.
- effgen#n.off – Like clicking the Off button in the effects generator menu.
- effgen#n.gen – Like clicking the effect types buttons in the effects generator menu. Please specify the name of the effect type to generate as an argument, using lower case. For example, “effgen#2.gen smoke” makes effects generator number 2 to start generating smoke.
- effgen#n.colour – Like using the buttons in the effects generator colours menu. Please specify a colour vector as an argument. For example: “effgen#2.colour <1.0, 0.5, 0.2>” sets the colour of the effect of effects generator number 2 to <1.0, 0.5, 0.2>.
- effgen#n.coloured – Like using the buttons in the effects generator custom colour menu. Please specify one or more colour edits as arguments. Each colour edit is composed of a letter (“r”, “g” or “b”), a plus or minus sign (indicating whether to increment or decrement that colour component) and a colour amount. For example: “effgen#2.coloured r-0.1 b+0.5” decreases the amount of red by 0.1 and increases the amount of blue by 0.5. Do not leave blanks between a letter and a sign or between a sign and the colour amount.
- effgen#n.density – Like using the density buttons in the effects generator properties menu. Please specify the desired density as an argument. For example, “effgen#2.density 3” sets the density of effects generator number 2 to 3.
- effgen#n.pos – Sets the effects generattor’s position in relation to the stage centre. Please specify a position vector as an argument. For example: “effgen#2.pos <1.0, -2.5, 0.0>” moves effects generator number 2 one metre to the right and 2.5 metres down from the stage centre.
- effgen#n.poscentre – Like clicking the Centre button in the effects generator position menu.
- effgen#n.posed – Like using the buttons in the effects generator position menu. Please specify one or more position edits as arguments. Each position edit is composed of a letter (“x”, “y” or “z”), a plus or minus sign (indicating whether to increment or decrement that position component) and a distance. For example: “effgen#2.posed x-1 z+0.5” moves effects generator number 2 one metre to the right and 0.5 metres up from its current position. Do not leave blanks between a letter and a sign or between a sign and the distance number.
- effgen#n.seek – Like using the buttons in the effects generator seek model menu. Please specify a seek position name as an argument, using lower case. For example: “effgen#2.seek feet” moves effects generator number 2 close to the model’s feet.
- effgen#n.closer – Like clicking the Closer button in the effects generator seek model menu.
- effgen#n.further – Like clicking the Further button in the effects generator seek model menu.
Gazers Commands
These commands are related to the buttons in the various gazers menus. Commands referring to a particular gazer carry a gazer id number (between 1 and 6) after the word “gazepoint” and prefixed by a “#” character; this is indicated by “#n” in the commands list below. Please do not leave any blanks between the word “gazepoint” and the “#” sign or between the “#” sign and the gazer id number.
-
gazepoints.deleteall – Like clicking the Delete All button in the gaze points menu.
- gazepoints.showall – Like clicking the Show All button in the gaze points menu.
- gazepoints.hideall – Like clicking the Hide All button in the gaze points menu.
- gazepoint#n.create – Like clicking the Create button in the gaze point menu. For example, “gazepoint#2.create” creates gaze point number 2.
- gazepoint#n.delete – Like clicking the Delete button in the gaze point menu.
- gazepoint#n.show – Like clicking the Show button in the gaze point menu.
- gazepoint#n.hide – Like clicking the Hide button in the gaze point menu.
- gazepoint#n.pos – Sets the gaze point’s position in relation to the stage centre. Please specify a position vector as an argument. For example: “gazepoint#2.pos <1.0, -2.5, 0.0>” moves gaze point number 2 one metre to the right and 2.5 metres down from the stage centre.
- gazepoint#n.poscentre – Like clicking the Centre button in the gaze point position menu.
- gazepoint#n.posed – Like using the buttons in the gaze point position menu. Please specify one or more position edits as arguments. Each position edit is composed of a letter (“x”, “y” or “z”), a plus or minus sign (indicating whether to increment or decrement that position component) and a distance. For example: “gazepoint#2.posed x-1 z+0.5” moves gaze point number 2 one metre to the right and 0.5 metres up from its current position. Do not leave blanks between a letter and a sign or between a sign and the distance number.
- gazepoint#n.seek – Like using the buttons in the gaze point seek model menu. Please specify a seek position name as an argument, using lower case. For example: “gazepoint#2.seek feet” moves gaze point number 2 close to the model’s feet.
- gazepoint#n.closer – Like clicking the Closer button in the gaze point seek model menu.
- gazepoint#n.further – Like clicking the Further button in the gaze point seek model menu.
Configurations Commands
These commands are related to the buttons in the configurations menu.
-
config.dump – Like clicking the Dump button.
-
config.reset – Like clicking the Reset button.
-
config.list – Lists all the available configurations stored in the PhotoLite.
-
config.load – Like using the configuration buttons in the configurations menu. Please specify the name of the configuration to be loaded as an argument. For example: “config.load Misty Rose” loads the “Misty Rose” configuration.
Integrated Commands
These commands work across several products, such as PhotoStand, PhotoStage and PhotoLite. You can control multiple products at the same time with a single command.
-
showall – Shows all hidden elements, including lights, effects generators and gaze points.
-
hideall – Hides all visible elements, including lights, effects generators and gaze points.
Settings
The PhotoLite can be customised using some settings that you can modify according to your preferences. For example, you can specify who can use your PhotoLite. Each setting is stored inside the Control Box as a notecard. Follow these steps in order to see or alter the settings:
-
Edit the PhotoLite Control Box by right-clicking it and selecting Edit in the pie menu. An Edit window appears.
-
Click the Content tab. You will see a list of notecards with names beginning with the # sign. These are settings. You will see also other items here in addition to settings; don’t try to change, delete or rename these items.
-
To change a setting, right-click it and select Rename from the menu. Change the text after the equals sign to whatever value you would like, respecting the limits applicable to that particular setting (see below). Press Enter when you are done to save the setting’s new value.
-
Wait a few seconds for the PhotoLite to apply the changed setting.
Important: Do not rename or change in any way the text between the # sign and the equals sign in a setting. Also, don’t leave any blanks to either side of the equals sign. If you do this, the setting will not be interpreted correctly by the PhotoLite.
The next sections describe each setting that is supported by the PhotoLite.
UsersAllowed
This setting controls who can use your PhotoLite. Possible values are the following:
All – Anybody can use the PhotoLite.
Group – Only active members of the same group the PhotoLite belongs to, plus the PhotoLite owner, can use it.
Owner – Only the PhotoLite owner can use it.
If this setting is not specified, or a value other than the above listed ones is used, All is assumed by default.
Channel
This setting controls which communications channel is used by the Control Box to talk to the lights, effect generators and gaze points. Possible values are numbers between (and including) 1 and 9.
If this setting is not specified, or a value other than the above mentioned is used, channel 1 is assumed by default.
ChatChannel
This setting controls which communications channel is used by the PhotoLite to listen to your chat commands. Possible values are numbers between (and including) 80 and 89.
If this setting is not specified, or a value other than the above mentioned is used, channel 81 is assumed by default.
Support
As an owner of PhotoLite, you are entitled to lifetime updates. Every time that a new version of PhotoLite is released you will receive it for free. The PhotoLite checks for new versions every time it is reset, and you can make it check for updates manually using the Update button (see the Options section). Please notice that beta or demonstration versions of PhotoLite do not qualify for lifetime updates.
We suggest that you join the Ananke Media Systems User Group to keep up to date about new developments and other information related to PhotoLite. Find this group using Second Life Search (Edit, Search), move to the Groups tab, enter “Ananke Media Systems User Group” (without the quotes), hit Enter, select the group in the list and click Join. Please make sure that you understand and agree with the group charter before you join.
The Ananke Media Systems website and blog is also a good source of information and support. Please visit us at https://anankemediasystems.wordpress.com and feel free to leave your comments.
You are also welcome to send us feedback about PhotoLite by sending email to serenitymercier@shaw.ca.
Thanks for using PhotoLite!
Usage Agreement
Please read carefully.
- As an owner of PhotoLite, you are free to utilise the product for its intended use as described in this User’s Manual and the AMS web site. Other uses are not allowed under this agreement.
- You are not allowed to disassemble or reverse-engineer PhotoLite.
- You are not allowed to alter PhotoLite’s prim configuration or prim properties other than by using the customisation mechanisms provided for that purpose and documented in this User’s Manual.
- Using PhotoLite implies your acceptance of this agreement.
Acknowledgments
Concept and Design by Serenity Mercier and Anna Tretiak.
Scripts by Anna Tretiak and Desdemona Enfield.
Smoke, fog and snow visual effects by Desdemona Enfield.
Trackback this post | Subscribe to the comments via RSS Feed